Table of Contents
Advertisement
Carton Inventory
Your garage door opener is packaged in two cartons
which contain the motor unit and all parts illustrated
below. Accessories will depend on the model
Multi-Function
Door Control Panel
Motor Unit with Light lens
Chain
Pulley Bracket
Safety Sensor
Bracket (2)
INSTALLATION HARDWARE
Hex Bolt 5/16"-18x7/8" (4)
Lag Screw 5/16"-9x1-5/8" (2)
Lag Screw 5/16"-18x1-7/8" (2)
Clevis Pin 5/16"x2-3/4" (1)
Clevis Pin 5/16"x1-1/4" (1)
Clevis Pin 5/16"x1" (1)
Nut 5/16"-18 (4)
Lock Washer 5/16" (4)
Screw 6ABx1-1/4" (2)
Screw 6-32x1" (2)
Self-Threading Screw 1/4"-14x5/8" (2)
SECURITY✚
®
Single-Button Remote Control (1)
Door Bracket
2 Conductor Bell Wire
White & White/Red
Trolley
(2) Safety Reversing Sensors
(1 Sending Eye and 1 Receiving Eye)
with 2-Conductor White & White/Black
Bell Wire attached
purchased. If anything is missing, carefully check the
packing material. Parts may be stuck in the foam.
Hardware for installation is also listed below.
Remote Control
Visor Clip
Chain
One-Piece
Rail
Header Bracket
Insulated Staples (30)
Ring Fastener (3)
Drywall Anchors (2)
Rope
Handle
Rail Grease
Carriage Bolt 1/4"-20x1/2" (2)
Wing Nut 1/4"-20 (2)
5
Sprocket Cover
Styrofoam
Curved Door
Arm Section
Safety Labels
and
Literature
Straight Door
Arm Section
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Access Master Security+ M385 and is the answer not in the manual?
Questions and answers
What code for the keypad is a Chamberlin M375. 0 thru 9 I think, to work with a clicker keypad.
The keypad code for the Chamberlain Security+ M385 is not fixed. You must program it manually. To do this:
1. Press the existing 4-digit PIN on the keypad, then press and hold the "#" button until the opener light blinks twice.
2. Enter a new 4-digit PIN and press "Enter."
3. The opener light will blink to confirm the new code is set.
If setting up for the first time, follow the learn button sequence using the multi-function door control and the keypad.
This answer is automatically generated