Table of Contents
Advertisement
Quick Links
Operating Instructions & Parts Manual
Model
MB12a
MBS12a
MB20a
MBS20a
Models MB12A & MB20A
!
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
adveRtencIa
!
• Leer, comprender, y seguir las instrucciónes antes
de utilizar el aparato.
• El manual de instrucciónes y la información de
seguridad deben estar comunicado en lengua del
operador antes del uso.
• No seguir estas indicaciónes puede causar daños
personales o materiales.
Read this manual and follow all the Safety Rules and Operating Instructions before using this product.
Bottle Jacks
U.S. Patent No. 5,946,912
capacity
12 ton
12 ton
20 ton
20 ton
Models MBS12A & MBS20A
WARNING
!
To avoid crushing and related injuries:
neveR work on, under or around a
load supported only by a hydraulic
jack. aLWaYS use a pair of adequately
rated jack stands.
(Short)
(Short)
MatcO tOOLS
http://www.matcotools.com
Printed in P.R.C.
MB12A-M2 11/12
Advertisement
Table of Contents
Related Manuals for Matco Tools MB12A
Summary of Contents for Matco Tools MB12A
- Page 1 20 ton (Short) Models MBS12A & MBS20A Models MB12A & MB20A U.S. Patent No. 5,946,912 This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
-
Page 2: Safety And General Information
Labels and Operator's Manuals are available from the manufacturer. PROdUct deScRIPtIOn Matco Tools Bottle Jacks are designed to lift, not support, rated capacity loads consisting of one end of a vehicle. Immediately after lifting, the load must be supported by a pair of appropriately rated jack stands. - Page 3 PRePaRatIOn Before Use 1. Verify that the product and application are compatible, if in doubt call Matco Tools Technical Service (866) BUY- TOOL. 2. Before using this product, read the operator's manual completely and familiarize yourself thoroughly with the product, its components and recognize the hazards associated with its use.
-
Page 4: Operation
WARNING WARNING • Study, understand, and follow all instructions before operating this device. • Do not exceed rated capacity. To avoid crushing and related injuries: • Use only on hard, level surface. • Never work on, under or around a load supported •... -
Page 5: Maintenance
Jack will lift, but not maintain • Release valve not tightly closed • Ensure release valve tightly closed pressure • Hydraulic unit malfunction • Contact Matco Tools Tech. Service Jack will not lower after • Reservoir overfilled • Ensure load is removed, then drain unloading... -
Page 6: Replacement Parts
When ordering parts, please give the Model number, part number and parts description. Call or write for current pricing: Matco Tools, 4403 Allen Road, Stow, OH 44224-1096, U.S.A. Tel: (866) BUY-TOOL Matco Tools Website: http://www.matcotools.com Replacement Parts List for Models MB12a, MBS12a, MB20a &... -
Page 7: One-Year Limited Warranty
One YeaR LIMIted WaRRantY For a period of one (1) year from date of purchase, Matco tools will repair or replace, at its option, without charge, any of its products, which fails due to a defect in material or workmanship under normal usage. This limited warranty is a consumer's exclusive remedy. - Page 8 Matco Tools 4403, Allen Road, Stow, OH 44224-1096, U.S.A. Tel: (866) BUY-TOOL Matco Website: http://www.matcotools.com...