Trouble Shooting; Fault Table - Siemens LB53NAA30 Instruction Manual

In the dishwasher:
If the metal mesh grease filters are cleaned in the
Note:
dishwasher, slight discolouration may occur. This has
no effect on the function of the metal mesh grease
filters.
Do not clean heavily soiled metal mesh grease filters
■
together with utensils.
Place the metal mesh grease filters loosely in the
■
dishwasher. The metal mesh grease filters must not
be wedged in.
Installing the metal mesh grease filter
Insert metal grease filter.
1.
Fold up metal grease filter and engage the lock.
2.
Make sure that the filter lock engages properly.
Note:
Activated charcoal filter (only in circulating-air mode)
To ensure effective odour removal, the filter must be
serviced regularly.
The activated charcoal filters must be replaced at least
every 3 months.
Notes
The activated charcoal filters are not included with
■
the appliance.The activated charcoal filters are
available from specialist retailers, from our after-
sales service or from our online shop.
The activated charcoal filters cannot be cleaned or
■
reactivated.
Only use genuine replacement filters. This will
■
ensure that the appliance performs optimally.
Removing the activated charcoal filter (only in
circulating-air mode)
Activated charcoal filters trap the odour-causing
compounds in cooking smells. They are only used for
circulating-air mode.
Remove the metal grease filter.
1.
Remove the grille and metal grease filter.
2.
Fitting the activated charcoal filter
Place the activated charcoal filter onto the metal
1.
grease filter.
Fix the activated charcoal filter to the grille.
2.

3Trouble shooting

M alfunctions often have simple explanations. Please
T r o u b l e s h o o t i n g
read the following notes before calling the after-sales
service.
:
Warning – Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be
carried out and damaged power cables replaced by
one of our trained after-sales technicians. If the
appliance is defective, unplug the appliance from the
mains or switch off the circuit breaker in the fuse box.
Contact the after-sales service.

Fault table

Problem Possible cause
The appliance The plug is not
does not work plugged into the
mains
Power cut
The fuse is faulty Check in the fuse box to make
The lighting does The LED lights
not work. are defective.
--------
Trouble shooting
en
Solution
Connect the appliance to the
power supply
Check whether other kitchen
appliances are working
sure that the fuse for the appli-
ance is in working order
You can read about this in the
section entitled "Replacing the
LED lights".
17