Super Energy Saving Setting - LG E2042C Owner's Manual

SUPER ENERGY SAVING Setting

1
Press ( SUPER ENERGY SAVING ) button on
the bottom of the Monitor set to display the SUPER
ENERGY SAVING OSD.
2
Set the options by pressing the ◄ or ► or ▼ buttons.
3
Select EXIT to leave the OSD menu.
Each option is explained below.
SUPER ENERGY SAVING
ON
OFF
RESET
NOTE
TOTAL POWER REDUCTION: How much power is saved while using the monitor.
y
TOTAL CO2 REDUCTION: Change the TOTAL POWER REDUCTION to CO2.
y
SAVING DATA(W/h)
y
SUPER SAVING
Saving Data depends on the Panel. So,those values should be different from each panel and panel
y
vendor.
LG calculated these values by using "broadcast video signal"
y
(including broadcast video: IEC 62087)
SUPER SAVING refers to how much power can be saved using the SUPER ENERGY SAVING
y
function.
Enables SUPER ENERGY SAVING you can save energy with this energy- efficient function
Disables SUPER ENERGY SAVING.
Resets the values of total energy consumption reduction and CO2 emission reduction
estimates.
396 mm 470 mm
(15.6 inch) (18.5 inch)
4 W/h 4 W/h
Description
508 mm 546 mm
(20 inch) (21.5 inch)
5 W/h 6 W/h
CUSTOMIZING SETTINGS
17