Summary of Contents for Campania International Charleston in Basin FT-257
Page 1
FT-257 Charleston in Basin Fountain Assembly Instructions Fountain Information: • Professional installation is recommended for this fountain! • This fountain holds approximately 240 gallons of water. • This fountain uses a medium fountain cover but does not cover the basin: FTNCOV-MED •...
FT-257 Charleston in Basin Fountain Assembly Instructions Professional installation is recommended for this fountain! Fountain Set-Up: Assembly & Installation - A fountain can be difficult to install without knowing and understanding the steps involved. To ensure your fountain is installed properly, please read our instructions and tips before you begin. Step 1 - Seek Professional Help: Check if professional installation is recommended for your fountain.
Page 3
FT-257 Charleston in Basin Fountain Assembly Instructions Step 10 - Place the large bowl (FT-256E) on top of the large pedestal (FT-256F). Step 11 - Place the standpipe inside the hole of the large bowl. Step 12 - Insert both lengths of 1/2" non-kink tubing through the pipe onto the bottom of the base. Make sure to feed the end with the assembled clear vinyl tubing down into the basin.
Page 4
FT-257 Charleston in Basin Fountain Assembly Instructions Step 22 - Cover the middle pedestal pump access (FT-256C) with the pump cover door (FT-256D). FT-256D (4 lbs) 5"L x 1.5"W x 5"H Step 23 - Cover the pump access in the bottom base with the pump cover door (FT-239L). FT-239L (8 lbs) 8.25"L x 1.75"W x 6.5"H Step 24 - Place 1 piece of coping (FT-124K) directly against the fiberglass basin (FGB-2020).
Maintenance: Pump Care - The fountain relies heavily on the quality of the pump. A well-maintained pump can last several years. Step 1 - Fully submerge: Ensure the pump is fully submerged at all times to avoid damage. Step 2 - E nsure water level is sufficient: Check water levels regularly as water may evaporate over time, and periodically change water to avoid algae buildup.