Table of Contents
Advertisement
Advanced Operations
Recording to USB
You can record a various sound source to USB.
(CD, AUX, PORTABLE, Tuner, USB)
1. Connect the USB device to the unit.
2. Press FUNCTION to select a Function you want
to record.
One track/file recording - You can record to USB
after playing a track/file you want.
All tracks/files recording - You can record to USB
in full stop status.
Programmed list recording - After showing the
Programmed list, you can record it to USB.
(Refer to page 33)
3. Start the recording by pressing USB REC/
DEMO.
-If you connect both USB1 and USB2, press USB
REC/DEMO when USB1 or USB2 which you
want to record blinks in the display window.
4. To stop recording, press I on the unit or
Z ENTER on the remote control.
Pausing recording
During recording, press T on the unit or d/M
on the remote control to pause recording. Press it
again to restart recording.
(Tuner/AUX/PORTABLE only)
,
Note
You can control recorded MIC sound according
to MIC volume when you record in AUDIO CD
X1 speed REC.
OM9550-FB.DAUSLLK_ENG_2808.indd 31
To select recording bit rate and
speed
1. Press and hold USB REC/DEMO for 3 seconds.
2. Press C/V on the remote control or
Y/U on the unit to select a bit rate.
3. Press USB REC to set.
4. Press C/V on the remote control or
Y/U on the unit to select a desired
recording speed. (AUDIO CD only)
X1 SPEED
- You can listen to music while recording it.
X2 SPEED
- You can just record the music file.
5. Press USB REC/DEMO to finish the setting.
USB Copying
You can copy audio files in USB 1 to USB 2.
1. Connect a USB device including desired sound
files to USB port (1) and select USB 1 Function.
2. Connect another USB device to USB port (2).
3. Press USB REC/DEMO to start recording.
4. To stop recording, press I on the unit or
Z ENTER on the remote control.
The making of unauthorized copies of copy-
protected material, including computer
programs, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offense.
This equipment should not be used for such
purposes.
Be responsible
Respect copyrights
Operating
31
3
2015-09-09
12:30:55
Advertisement
Table of Contents
