Emptying The Dust Cup Assembly - Shark NAVIGATOR NV46 Series Owner's Manual

Emptying the Dust Cup Assembly

For best results empty the Dust Cup
after each use; empty several times
during prolonged usage. or when it
reaches the MAX fill line.
NEVER OVER-FILL THE DUST
CUP.
Stand vacuum into upright position.
Turn vacuum off.
1
To empty the Dust Cup:
1
Grip carry handle and press
the Dust Cup release button to
remove.
2 Option A: For Quick Empty:
Insert Dust Cup deep inside
trash receptacle to contain dust
and debris.
Press the bottom Dust Cup
release button; tap container
gently to dislodge and release
dust and debris.
Snap door in place.
Important: If the Dust Cup
Door does not swing open after
pressing the release button,
push the door open using the
bottom door tabs.
8 TOLL FREE: 1-800-798-7398
2
3 Option B: For Allergy Sufferers:
Wrap a trash bag around the
Dust Cup leaving space at the
bottom for the door to swing
open.
Locate the Dust Cup Door
release button within the trash
bag and press to release as you
shake the dust cup to empty
dust and debris.
Snap the bottom door in place.
Note: Option B can also be
performed outside of the home
to further minimize releasing
dust back into the air. Carry just
the Dust Cup and trash bag
outside.
CAUTION:
Unplug the vacuum; failure
to do so might result in
electric shock.
3
Note: Some dust and debris
may remain in the top of your
dust cup on or near the metal
screen. It is not necessary to
completely remove this material
before continuing to vacuum;
Shark advanced cyclonic action
®
will sweep the metal screen
clean once you begin to refill
your dust cup.