Viewing Mode; Contrast; Colour; Sharpness - Panasonic Viera TH-P42S10D Operating Instructions Manual

How to Use Menu Functions
Menu List
Menu Item

Viewing Mode

Contrast, Brightness,
Colour, Sharpness
Tint
Colour Balance

Channel Colour Set

Colour Management
x.v.Colour
Eco Mode
P-NR
3D-COMB
Reset to Defaults
Mode
Bass
Treble
Balance
Headphone Volume
Surround
Volume Correction
Speaker Distance
to Wall
MPX
HDMI1 / 3 Input
Reset to Defaults
22
Adjustments / Configurations (alternatives)
Basic picture mode (Dynamic / Normal / Cinema / Game)
Dynamic : Provides enhanced picture contrast and sharpness when viewing in a bright room
Normal : Recommended for viewing under normal ambient room lighting conditions
Cinema : For watching movies in a darkened room producing a cinema-like picture
Game : Game playing time is displayed only when connecting a game equipment
Set for each input signal
z
Increases or decreases the levels of these options according to your personal preference
With an NTSC signal source connected to the TV, the picture hue can be adjusted to suit
your taste
For NTSC or Component / HDMI input signal reception only
z
Allows you to set the overall colour tone of the picture (Cool / Normal / Warm)
Colour density varying between broadcast channels can be adjusted to three levels
for each reception channel
Select the channel you want to adjust and set this function
z
Automatically adjusts colours to vivid ones (Off / On)
Not valid on PC signal
z
Increases the colour gradations (Off / Auto)
This is effective when watching HD moving pictures from an external equipment or an SD card.
For HDMI or "Movie View" mode (p. 34) only
z
Adjusts picture settings automatically dependent on ambient lighting conditions (Off / On)
Picture Noise Reduction
Automatically reduces unwanted picture noise and flicker noise in the contoured parts of a
picture (Off / Min / Mid / Max)
Not valid on PC signal
z
Occasionally, whilst viewing still or slow moving pictures, colour patterning may be seen
Set to "On" to display sharper and more accurate colours (Off / On)
For PAL or NTSC signal reception only
z
Not valid on S-Video, Component, PC, HDMI and SD Card
z
Press the OK button to reset the present Picture Menu to the default settings
Basic sound mode (Music / Speech)
Set for each input signal
z
Increases or decreases level to enhance or minimise lower, deeper sound output
Increases or decreases level to enhance or minimise sharper, higher sound output
Adjusts volume level of right and left speakers
Adjusts the volume of the headphones
Surround sound settings (Off / V-Audio / V-Audio Surround)
V-Audio: Provides a dynamic enhancer to simulate improved spatial effects
V-Audio Surround: Provides a dynamic enhancer of width and depth to simulate improved
spatial effects
Switching is also possible by the Surround button on the remote control (p. 9).
z
Adjusts volume of individual channel or input mode
Adjusts the low frequency sound (Over 30cm / Up to 30cm)
Over 30cm: Recommended when the back space between the TV and wall is over 30 cm.
z
Up to 30cm: Recommended when the back space between the TV and wall is within 30 cm.
z
Selects stereo / monaural (Stereo / Mono) (p. 43)
Normally: Stereo
z
Stereo signal cannot be received: Mono
z
M1 / M2: Available while mono signal is transmitted
z
Select to fit the input signal (Digital / Analogue) (p. 43)
Digital: HDMI cable connection
Analogue: HDMI-DVI adapter cable connection
HDMI input mode only
z
HDMI2 terminal is for digital signal only
z
No setting for HDMI2 available
z
Press the OK button to reset the present Sound Menu to the default settings