Connecting to a TV antenna or cable
Connecting an FM radio antenna
Selecting an A/V input source
After connecting a display device to the system, you can run Media Center to
setup the display device's input signal.
1
Open Media Center. See "Opening Media Center" on page 27.
2
Select My TV > More TV.
3
On the right side of the screen will show AV-input Source Selection, choose
an input source from the following options:
•
AV1/SCART1 - Video
•
AV1/SCART1 - S-Video
•
AV2 - Video
Notes:
1 When you move your mouse cursor, the MCE media playback toolbar
appears on the screen but most of the functions on the toolbar are not
supported.
2 To record you can press the record button on the remote control and to
stop recording press the stop button.
3 Make sure that your TV regional settings match with the input signal.
4 Make sure that your original content is not copy-protected when you
record a content from an A/V input.
A
A
•
•
•
AV2 - S-Video
AV3/SCART2 - Video
AV3/SCART2 - S-Video
17