Mitsubishi Electric MSZ-LN18VGW-E1 Service Manual page 44

OPERATING PROCEDURE
5. Removing the DISPLAY AND i-see SENSOR
ASSEMBLY, the switch buzzer P.C. board, the
display and receiver P.C. board, and the inter-
lock switch (Photo 9)
(1) Disengage the 4 catches of the display cover, and
remove the display cover (Photo 9-1).
(2) Remove the lead wires of the DISPLAY AND i-see
SENSOR ASSEMBLY from the hooks (Photo 9-2).
(3) Disengage the 4 catches of the switch holder, and
remove the switch holder (Photo 9-3).
(4) Turn over the switch holder. Remove the lead wires
of the switch buzzer P.C. board, the display and
receiver P.C. board, and the interlock switch from the
hook. Remove the switch buzzer P.C. board, the dis-
play and receiver P.C. board, and the interlock switch
(Photo 9-4).
Photo 9 (Details of the display, DISPLAY AND i-see SENSOR ASSEMBLY, and board in the switch holder)
Photo 9-4
Display and receiver P.C. board
Switch buzzer P.C.
board
Switch holder
DISPLAY AND i-see
SENSOR ASSEMBLY
Display cover
Exploded view of display cover
and DISPLAY AND i-see SENSOR
ASSEMBLY (Switch buzzer P.C.
board, display and receiver P.C.
board)
OBH766B
Photo 9-3
Catches
Switch
holder
Top view of DISPLAY AND
Interlock
switch
i-see SENSOR ASSEMBLY
Photo 9-1
Display cover
Catches
Front view of DISPLAY AND
i-see SENSOR ASSEMBLY
44
PHOTOS/FIGURES
Photo 9-2
Catches
Right side view of
DISPLAY AND i-see
SENSOR ASSEMBLY
Hooks