Lifting And Moving The Monitor; Setting Up The Monitor Set; Attaching The Stand Base - LG 19CNT42K-B Owner's Manual

Lifting and moving the
Monitor
Please heed the following information when
moving the monitor.
CAUTION
Avoid touching the screen at all times, as this
y
may result in damage to the screen or pixels .
It is recommended to move the Monitor in
y
the box or packing material that the Monitor
originally came in.
Before moving or lifting the Monitor,
y
disconnect the power cord and all cables.
Hold the top and bottom of the Monitor frame
y
firmly. Make sure not to hold the transparent
part area.
When holding the Monitor, the screen should
y
face away from you to prevent the screen
from scratches.
When transporting the Monitor, do not
y
expose the Monitor to jolts or excessive
vibration.
When transporting the Monitor, keep the
y
Monitor upright, never turn the Monitor on its
side, or tilt towards the left or right.
ASSEMBLING AND PREPARING

Setting Up the Monitor set

Attaching the Stand Base

1
Place the monitor's screen face down.
CAUTION
To protect the screen from scratches,
y
cover the surface with a soft cloth.
2
Check the position (at the front and rear) of
the stand body, then mount the stand base on
the stand body as shown in the figure.
3
Using a coin, turn the screw clockwise to se-
cure the stand base.
Stand Base
5
Stand Body
Stand Base