Table of Contents
Advertisement
Wired connection setting
Ethernet speed setting: Set the network
y
speed.
You can select Auto-Detect, 10Mbps,
100Mbps or 1000Mbps.
DHCP setting: Set the DHCP mode. If it is
y
set to On, an IP is automatically fetched from
a DHCP server and used.
Static connection setting: If DHCP is set to
y
Off, the input window is displayed for detailed
setting. Enter the IP Address, Subnet Mask,
Default Gateway and DNS Server fields and
then click the OK button.
Activity setting: Set to turn on/off a wired
y
network.
Enable: Wired network is used.
Disable: Wired network is not used.
Using CITRIX Solution
Wireless setting
The AP list for wireless network connection is
y
displayed. Click the Refresh button to update
the list of accessible APs.
Double click an AP or click the Connect but-
y
ton after selecting an AP to access the AP.
When the connection is established, the AP
is marked as connected in the list.
When you select a connected AP and then
y
click the right mouse button, the Disconnect
and Set-Up buttons are displayed. If you se-
lect an AP which is not connected and then
click the right mouse button, the Connect
button is displayed.
29
Advertisement
Table of Contents
