Customizing Settings; Accessing The Main Menus - LG 19CNT42K-B Owner's Manual

Cloud monitor
Table of Contents

Advertisement

CUSTOMIZING SETTINGS

Accessing The Main Menus

1
Press any button on the front of the monitor to display the MONITOR SETUP OSD menu.
2
Press to select the desired menu item.
3
To change the settings of the selected item press the buttons on the front of the monitor.
To return to the upper menu or set other menu items, use the up arrow (
4
Select EXIT to leave the OSD menu.
MENU
Button
MENU
Activates the main menu.
OSD Lock/Unlock
Functions
VOL
Adjust the volume of the Monitor set.
CLOUD
AUTO
To adjust the monitor settings, press the AUTO button on the MONITOR SETUP OSD menu (only
supported for analog signal).
For optimal screen display, use the following resolution.
Optimal Resolution
INPUT
Allows selection of the input signal.
y If you connect the monitor to a computer using a D-SUB cable, select either the CLOUD or
D-SUB input signal.
y The initial input signal is D-SUB.
EXIT
Exits the OSD menu.
y D-SUB Input: Power On/Off
(Power Button)
y CLOUD Input
Monitor Off: Press the power button once then the monitor will be turned off after 5 seconds.
CLOUD Off: Press the power button twice then the monitor and CLOUD connection will be
disabled.
CLOUD On: Press the power button.
Remote PC Power Control: Press the power button for at least five seconds to turn the PC
on/off.
* Remote PC Power Control only works on the host PC where PCoIP host card is installed
and requires separate setup.
Power Indicator
CLOUD
AUTO
INPUT
Front Side Buttons
Description
Locks/unlocks the OSD screen.
y To lock the OSD screen, press and hold the MENU button for several
seconds. The "OSD LOCKED" message will be displayed and the
screen will be locked.
y To unlock the OSD screen, press and hold the MENU button again for
several seconds. The "OSD UNLOCKED" message will be displayed
and the screen will be unlocked.
1920 x 1080
When the monitor is in operating mode, the power indicator will turn Red
(on mode).
When the monitor is in power saving mode, the power indicator will blink
Red.
CUSTOMIZING SETTINGS
) button.
EXIT
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

19cnt42k

Table of Contents