Pioneer DivX DMH-G220BT Operation Manual page 32

Menu Item
[Fader/Balance]
[Source Level Adjuster]
[-4] to [+4]
[Subwoofer]
[On] [Off]
[Speaker Level]
[Front Left] [Front Right]
[Rear Left] [Rear Right]
[Subwoofer] [Listening
Position]
[Subwoofer Settings]
[Listening Position]
[Off] [Front Left] [Front
Right] [Front] [All]
[Bass Boost]
[0] to [+6]
Description
Touch or to adjust the front/rear speaker balance. Set
[Front] and [Rear] to [0] when using a dual speaker system.
Touch or to adjust the left/right speaker balance.
TIP
You can also set the value by dragging the point on the displayed table.
NOTE
Only the fader can be adjusted when [Rear] is selected as the
speaker mode.
Adjust the volume level of each source to prevent radical
changes in volume when switching between sources other
than FM.
Touch or to adjust the source volume after
comparing the FM tuner volume level with the level of the
source.
TIP
If you directly touch the area where the cursor can be moved, the
SLA (source level adjustment) setting will be changed to the value
of the touched point.
NOTES
• Settings are based on the FM tuner volume level, which remains
unchanged.
• This function is not available when the FM tuner is selected as
the AV source.
Select enable or disable subwoofer output from this
product.
Adjust the speaker output level of the listening position.
1
Touch or
select the output speaker.
2
Touch or to adjust the selected speaker output
level.
NOTE
For rear speaker, this function is available only when [Rear] is
selected in [Preout].
Select the subwoofer phase and LPF cut-off frequency
(page 33).
Select a listening position that you want to make as the
centre of sound effects.
Adjust the bass boost level.
- 32 -
to select the listening position then