Pioneer DivX DMH-G220BT Operation Manual page 27

CAUTION
Pioneer recommends the use of a camera which outputs mirror reversed images, otherwise the screen
image may appear reversed.
• Immediately verify whether the display changes to the rear view camera image when the gearstick is
moved to REVERSE (R) from another position.
• When the screen changes to full-screen rear view camera image during normal driving, switch to the
opposite setting in [Camera Polarity].
• If you touch while the camera image is displayed, the displayed image turns off temporarily.
Menu Item
[Back Camera Input]
[Off] [On]
[Camera Polarity]
[Battery]
[Ground]
[Safe Mode]
Menu Item
[Safe Mode]
[On] [Off]
[System Language]
Menu Item
[System Language]
Description
Setting rear view camera activation.
Setting the polarity of the rear view camera.
The polarity of the connected lead is positive.
The polarity of the connected lead is negative.
NOTE
This function is available when [Back Camera Input] is set to [On].
Description
Set the safe mode that regulate operating some functions
only when you stop your vehicle in a safe place and apply
the handbrake.
Description
Select the system language.
NOTES
• If the embedded language and the selected language setting are
not the same, the text information may not display properly.
• Some characters may not be displayed properly.
- 27 -