Electrolux EIS62341 User Manual page 19

Problem
comes on.
comes on.
and appear alter‐
nately.
and appear alter‐
nately.
and appear alter‐
nately.
You hear a beep sound,
the indicators above
blink and the SenseBoil®
function does not start.
and a number come on. There is an error in the
You can hear a constant
beep noise.
Possible cause
Child Safety Device or
Lock operates.
There is no cookware on
the zone.
The cookware is unsuita‐
ble.
The diameter of the bottom
of the cookware is too
small for the zone.
The power is too low due
to unsuitable cookware or
an empty pot.
The pot is empty or con‐
tains some liquid other
than water, e.g. oil.
There is too much or too
little water in the pot.
You boiled some food oth‐
er than water and pota‐
toes. The boiling point was
moved in time and the
SenseBoil® function could
not work properly.
None of the cooking zones
is ready to be used with
the SenseBoil® function.
There is some residual
heat on the cooking zones
you want to choose or they
are still in use.
hob.
The electrical connection is
incorrect.
ENGLISH
Remedy
Refer to "Daily use".
Put cookware on the zone.
Use suitable cookware.
Refer to "Hints and tips".
Use cookware with correct
dimensions. Refer to
"Technical data".
Use the appropriate type of
cookware. Refer to "Hints
and Tips" and "Technical
Data".
Do not activate any zone
with an empty pot on it.
Avoid using the function
with liquids other than wa‐
ter.
Refer to "Hints and Tips".
Only boil water and pota‐
toes with the use of Sense‐
Boil®.
Finish your previous cook‐
ing activities and choose a
free cooking zone without
any residual heat.
Deactivate the hob and ac‐
tivate it again after 30 sec‐
onds. If comes on
again, disconnect the hob
from the electrical supply.
After 30 seconds, connect
the hob again. If the prob‐
lem continues, speak to an
Authorised Service Centre.
Disconnect the hob from
the electrical supply. Ask a
qualified electrician to
check the installation.
19