Table of Contents
Advertisement
10
www.electrolux.com
4.4 OptiHeat Control (3 step
Residual heat indicator)
WARNING!
burns from residual heat.
The indicators show the
level of the residual heat for
the cooking zones you are
currently using. The
indicators may also come on
for the neighbouring cooking
zones even if you are not
using them.
5. DAILY USE
WARNING!
Refer to Safety chapters.
5.1 Activating and deactivating
Touch
for 1 second to activate or
deactivate the hob.
5.2 Automatic Switch Off
The function deactivates the hob
automatically if:
• all cooking zones are deactivated,
• you do not set the heat setting after
you activate the hob,
• you spill something or put something
on the control panel for more than 10
seconds (a pan, a cloth, etc.). An
acoustic signal sounds and the hob
deactivates. Remove the object or
clean the control panel.
• the hob gets too hot (e.g. when a
saucepan boils dry). Let the cooking
zone cool down before you use the
hob again.
• you use incorrect cookware. The
symbol
zone deactivates automatically after 2
minutes.
• you do not deactivate a cooking zone
or change the heat setting. After some
time
deactivates.
The relation between the heat setting
and the time after which the hob
deactivates:
/
/
There is a risk of
comes on and the cooking
comes on and the hob
The induction cooking zones produce the
heat necessary for the cooking process
directly in the bottom of the cookware.
The glass ceramic is heated by the heat
of the cookware.
5.3 The heat setting
To set or change the heat setting:
Touch the control bar at the correct heat
setting or move your finger along the
control bar until you reach the correct
heat setting.
5.4 SenseBoil®
The function automatically adjusts the
temperature of water so that it does not
boil over once it reaches the boiling
point.
If there is any residual heat
(
/
/
cooking zone you want to
use, an acoustic signal is
emitted and the function
does not start.
The function works on the
cooking zones on the left.
1. Touch
to activate the hob.
2. Touch
to activate the function.
A blinking
appears for cooking zones
on which you can presently use the
function.
) on the
Advertisement
Table of Contents
