Sound Adjustments; Enhancing The Bass Tone (D-Bass); Adjusting The Tone Or Playing Surround Audio (Tone); Resetting The Adjusted Sound To The - Kenwood K-525-S Instruction Manual

Sound Adjustments

Enhancing the bass tone
(D-BASS)
The level of the low frequency enhancement can
be set as desired in the range from 0 (D-BASS OFF)
to 10.
1
Select D-BASS.
Press [D-BASS].
2
Adjust the enhancement level.
Press [G]/[H].
The level can be adjusted in the increment/
decrement of 1.
D-BASS 0
D-BASS is OFF.
D-BASS 5
Low frequencies are
D-BASS 10
enhanced.
" " lights when D-BASS is set.
3
Enter the selection.
Press [ENTER].
K-525
Adjusting the tone or playing
surround audio (TONE)
The volume levels of low frequencies (BASS)
and high frequencies (TREBLE) can be set
independently in the ranges between −6 and +6.
When DTS Surround Sensation is set, the music
can be enjoyed in the 3D surround eff ect with high
feeling of presence.
1
Select TONE.
Press [SOUND].
Each press switches the tone mode alternately.
Adjust the low frequencies.
Adjust the high frequencies.
Select DTS Surround Sensation.
Cancels the setting mode.
2
Select the frequency range to
be adjusted and adjust it to the
optimum level. Alternatively, select
DTS Surround Sensation for the
surround eff ect.
32
■ When "BASS" or "TREBLE" is selected:
Press [G]/[H].
The level can be adjusted in the increment/
decrement of 1.
BASS +6
To increase
BASS 0
BASS -6
To decrease
" " lights when the BASS or TREBLE tone is
set.
■
When "Surr Sens" is selected:
Press [G]/[H].
Each press switches the DTS surround eff ect in the
following order.
DTS OFF
Surround is OFF.
DTS ON : 1
Surround is ON.
Surround eff ect is enhanced
DTS ON : 2
further.
" " lights when DTS Surround Sensation is
set.
3
Enter the selection.
Press [ENTER].
• It is not possible to adjust the tone (BASS/TREBLE), DTS
Surround Sensation ( ) and D-BASS simultaneously.
• The DTS Surround Sensation ( ) eff ect is cancelled
when headphones are connected. Disconnecting the
headphones resumes the previous eff ect.
Resetting the adjusted sound to
the original sound (FLAT)
The results of the D-BASS and TONE adjustments
can be cancelled to fl at levels so that the original
sound is reproduced.
1
Select FLAT.
Press [FLAT].
Each press switches FLAT/UNDO alternately.
When FLAT is selected, the "D-BASS", "TONE" and
" " settings are cancelled and their indicators
extinguished.
• Pressing [FLAT] cancels the low frequency
enhancement (D-BASS), tone adjustments (TONE)
and DTS Surround Sensation eff ect (
it again returns the low frequency enhancement,
tone adjustments and DTS Surround Sensation to the
previous settings.
33
). Pressing
English