Table of Contents
Advertisement
Fixed connection
Fit the power line with an omnipolar circuit
breaker in compliance with installation
regulations.
The circuit breaker should be located near
the appliance and in an easily reachable
position.
Connection with plug and socket
Check that the plug (not supplied) and
power socket are compatible and of
adequate capacity for the maximum current
draw of the appliance.
Avoid using adapters and shunts as these
could cause overheating and a risk of
burns.
Installation
Cable replacement
Power voltage
Danger of electrocution
• Disconnect the mains power supply.
1. Use a flat-head screwdriver to unhook
and lift the cover to access the terminal
board.
2. Replace the cable.
3. Make sure that the cables follow the best
route in order to avoid any contact with
the appliance.
47
Advertisement
Table of Contents
