Removing Pedestal Stand - Toshiba 19SL400U Owner's Manual

7) VESA Mounting Pattern
TV Size Hole Pattern(HxV)
19" 100x100 mm
22" 100x100 mm
26" 200x100 mm
32" 200x200 mm
Removing the Pedestal Stand
1) Carefully lay the front of the unit face down on a
flat, cushioned surface such as a quilt or blanket.
Leave the stand protruding over the edge of the
surface.
Note: Extreme care should always be used
when removing the pedestal stand to avoid
damage to the LCD panel.
2) Remove the four screws shown in the right
diagram. This will allow removal of the pedestal
stand.
3) Once you have removed all four screws, holding
the pedestal stand in place, remove the pedestal
stand from the TV.
19" TV
VESA Mounting Pattern
Two screws
6
22" TV
Screw Size
M4
M4
M4
M6
(unit in mm)
Two screws
CAUTION: Always place the TV on the floor or a sturdy,
level, stable surface that can support the weight of the unit.
26" TV
Four screws
32" TV
Four screws
CAUTION: Always place the TV on the floor or a
sturdy, level, stable surface that can support the
weight of the unit. To secure the TV, use a sturdy
strap from the hook(s) on the rear of the TV to a wall
stud, pillar, or other immovable structure. Make sure
the strap is tight, secure, and parallel to the floor.
VESA Mounting Pattern
VESA Mounting Pattern
Hook
Sturdy strap
(as short as possible)
VESA Mounting Pattern
Hook
Sturdy strap
(as short as possible)