Setting The Sleep Timer; Automatic Power Down; No Signal Power Down - Toshiba 19SL400U Owner's Manual

Contents Description
Music list (Multi view)
Music
Sorting
To sort the folders and files
1無
to open the Quick Menu.
Press
2無
Press  or  to select Sort.
3無
Press  or  to select Title, New
or Old to set the sorting rule.
Playback
Pause
Stop
Skip
Repeat play
SOUND Settings
("Adjusting the audio quality")
Note: Sorting, Total Time display may not be
available in all cases.

Setting the sleep timer

You can set the sleep timer to turn off the TV after a
set length of time (maximum of 180 minutes).
To set the sleep timer using the remote control:
Press on the remote control to set the length of
time until the TV turns off. Repeatedly press
increase the time in 10-minute increments, or press
 or  to increase or decrease the time in 10-minute
increments, to a maximum of 180 minutes.
To set the sleep timer using the on-screen
menus:
1無
and open the Setup menu.
Press
2無
Highlight Sleep Timer and press
3無
Press the Number buttons to enter the length of
time in 10-minute increments.
4無
Highlight Done and press
Note: When a power failure occurs, the
sleep timer setting may be cleared.
To display the remaining sleep time:
Press .
Note: A message will display on-screen when
there is one minute remaining on the sleep timer.
Chapter 6: Using the TV's features
To cancel the sleep timer:
Description
Repeatedly press
See page 45.

Automatic Power Down

The TV will automatically turn itself off (standby)
after 4 hours, if you do not operate the TV either
from the remote control or the TV control panel.
1無
2無
See page 45
3無
See page 46
Note:
See page 45
This feature is set to On when Location is set
•
See page 45
to Home.(Also see item 3 of "Initial Setup" on
See page 45
page 24)
1 minute before switching to standby, a
•
See page 38
warning message will appear.
When the following features are set, the
•
feature that is set for the nearest time will
function.
− Automatic Power Down
− Sleep Timer
− No signal auto power off (after 15 minute of

No Signal Power Down

The TV will automatically turn itself off after 15
to
minutes when no signal is detected.
You can change the setting to Off for the following
purposes:
•
•
1無
.
2無
.
3無
Note:
Default setting is all On.
•
A warning message will appear 1 minute
•
before turning off.
until it is set to 0 minute.
From the Preferences menu, highlight Energy
Saving Settings and press
Press  or  to select Automatic Power Down.
Press  or  to select On or Off, and press
no signal).
low signal strength of analog channel (no signal
detection)
Only Audio L/R is connected to external input to
listen to music through the TV speakers.
From the Preferences menu, highlight Energy
Saving Settings and press
Press  or  to select No Signal Power Down
and press .
Press  or  to highlight the item you want to
change, and press  or  to select On or Off.
.
.
.
(continued)
47