Hitachi RAK-35RPD Service Manual page 8

SWITCH SETTING TO SELECT 1.5kW
OR 1.0kW CAPACITY
!
CAUTION
Before setting the switch, make sure to turn OFF
power supply and then set the position of the switch
otherwise will cause damage to the Main PCB.
SWITCH POSITION CAPACITY SELECTION
1.0kW
1.0kW
NOTE:
FACTORY default setting is at 1.5kW capacity.
This setting is applicable for RAK-15QPD only.
1.5kW 1.0kW
1.5kW 1.5kW
8