Setup/Installation Menu Layout; Navigating The Menu System - Toshiba 65HT2U Owner's Manual

Setup/Installation menu layout

The Installation menu contains the Terrestrial and System Status menus.
To open the Installation menu (illustrated below), press
Setup menu, select Installation, and press
Icon Item
Input Configuration
Terrestrial
Channel Program
Channel Options
Channel Tuning Mode
Time Zone
Signal Meter
System Status
System Information

Navigating the menu system

You can use the buttons on the remote control or TV
control panel to access and navigate your TV's on-
screen menu system.
Press to open the menu system.
•
When a menu is opened, use the up/down/left/
•
right arrow buttons (pqtu) on the remote
control or pq on the TV control panel to move
in the corresponding direction in the menu.
Press to save your menu settings or select
•
a highlighted item. (A highlighted menu item
appears in a different color in the menu.)
All menus close automatically if you do not make
•
a selection within 60 seconds, except the signal
meter menu, which closes automatically after
about 5 minutes.
To close a menu instantly, press
•
Chapter 4: Menu layout and navigation
.
Option
 [Opens the Input Configuration menu]
 [Start Scan]  [Scans for new channels on ANT/CABLE]
 [Opens the Skip / Lock Channel menu]
 Standard / Auto / Digital
 Eastern / Newfoundland / Atlantic / Hawaii / Alaska /
Pacific / Mountain / Central
 [Opens the Signal Meter menu]
 [Opens the System Information screen]
.
on the remote control or TV control panel, open the
Note:
The menu background may sometimes appear
black, depending on the signal the TV is
receiving. This is not a sign of malfunction.
23