Use Sound Mode; Select A Digital Audio Language; Automatically Install Channels; Update Scan - Sharp LC-26SH330E Operation Manual

TV menu

Use Sound Mode

Apart from manually adjusting sound settings, you
can use Sound Mode to set your TV to a predefined
sound setting.
1�
Press MENU on the remote control and select
Sound.
2�
Press OK or ≥ to enter Sound and select
Sound Mode�
3�
Press ≤≥ to select one of the following
settings:
• Personal
• Music
• Speech
4�
Follow the on-screen instructions to exit.
TV
The first time you set up your TV, you are prompted to
select an appropriate menu language and to perform
automatic installation of TV and digital radio channels
(If available).
This chapter provides instructions on how to reinstall
channels as well as other useful channel installation
features.
NOTE
• Re-installing channels modifies the channel list.

Select a digital audio language

1�
Press MENU on the remote control and select
TV.
2�
Press OK or ≥ to enter TV menu.
3�
Press <> to select 1st Audio or 2nd Audio.
4�
Highlight your selection and press ≤≥ to select
an audio language.
5�
Follow the on-screen instructions to exit.
NOTE
• If your selected audio language is not broadcasted, the
default audio language will be displayed.

Automatically install channels

This section describes how to search and store
channels automatically. Instructions are for both digital
and analogue channels.
Step 1: Select your Tuner Mode
1�
Press MENU on your remote control and select
TV ≥ Tuner Mode.
2�
Press ≤≥ to select Antenna or Cable.
3�
Follow the on-screen instructions to exit.
Step 2: Select your country
Select the country where you are located. The TV
installs and arranges channels according to your
country.
1�
Press MENU on the remote control and select
TV ≥ Country.
2�
Press ≤≥ to select your country.
3�
Follow the on-screen instructions to exit.
Step 3: Automatic channel scan
Your TV searches and stores all available digital and
analogue TV channels as well as all available digital
radio channels.
1�
Press MENU on the remote control and select
TV ≥ Channels�
NOTE
• You are prompted to enter current password to enter
Channels if Channel Block /Parental Guidance /
Input Block in the Parental menu is not the default
setting.
2�
Select Channel Scan and press OK or ≥
and select ATV only or ATV and DTV to start
channel installation. The installation may take a
few minutes.
3�
When complete, follow the on-screen
instructions to exit.
E Update Scan
Update Scan has similar function with Channel Scan.
The difference is you could update channel list without
erasing the original information.
NOTE
• This function is for Antenna mode only.
1�
Press MENU on the remote control and select
TV ≥ Channels.
NOTE
• You are prompted to enter current password to enter
Channels if Channel Block /Parental Guidance /
Input Block in the Parental menu is not the default
setting.
2�
Press <> to select Update Scan and press
OK or ≥ to start channel update.
3�
When complete, follow the on-screen
instructions to exit.
13