Table of Contents
Advertisement
OperatIng the product
C
For energy saving, the machine
is automatically switched off
following the completion of
the programme or when the
programme is not started.
C
Leave your dishes in the machine
for about 15 minutes after
they are washed in order to
have them cooled. Your dishes
will dry in a shorter time if you
leave the door of your machine
ajar during this period. This
process will increase the drying
effectiveness of your machine.
Water Cut-off Warning
If mains water is cut off or water inlet tap is
turned off, the machine will not take water in
and water off indicator will flash. As long as
the problem continues, washing programme
is paused and the water inlet is checked
regularly by the machine; when the water is
restored water off indicator will disappear
after a while and the washing programme
resumes.
Overflowing Warning
If the machine intakes too much water or
there is leakage at any of the components
then the machine will detect this and
water overflow indicator will flash on
the Programme indicator. As long as the
overflowing continues safety algorithm will
be active and try to discharge the water. If
overflowing stops and safety is assured,
water overflow indicator will disappear. If
the indicator does not disappear, there is a
permanent fault. In this case the authorised
service should be contacted.
34
/43 EN
Dishwasher / User's Manual
Advertisement
Table of Contents
