Cancelling The Programme; Salt Indicator ( ); Rinse Aid Indicator ( ); Adjusting The Amount Of Rinse Aid - Beko DIN36420 User Manual

Table of Contents

Advertisement

OperatIng the product

Cancelling the programme

Press and hold the Programme Selection
/ Programme Cancel keys for 3 seconds.
Release the key as the Start indicator starts
flashing.
Once you close the door of your machine,
draining is completed in 2 minutes
and the machine gives an audible warning
when it is completed.
C
There might be residues of
detergent or rinse aid left in the
machine and/or on the pieces
being washed depending on the
step in which the programme
has been cancelled.
Salt Indicator (
Please check the salt indicator on the display
to see whether there is adequate amount
of softening salt in the dishwasher or not.
You need to refill the salt reservoir with
salt whenever salt indicator appears on the
display of your machine.
C
Adjusting the water hardness
level is explained in Water
Softening System section.

Rinse Aid Indicator ( )

Please check the rinse aid indicator on the
display to see whether there is adequate
amount of rinse aid in the dishwasher or
not. You need to refill the rinse aid reservoir
with rinse aid whenever rinse aid indicator
appears on the display of your machine.
Dishwasher / User's Manual
)
Adjusting the amount of
rinse aid
1.
After turning on your machine, press
and hold the Time Delay and Start /
Pause / Cancel keys respectively.
2. Using the Time Delay key, turn on the 6
LED.
3. You can use the function keys to adjust
the rinse aid level.
If the 1st programme indicator is on, no rinse
aid will be dispensed
If the 2nd programme indicator is on, 1 dose
of rinse aid will be dispensed.
If the 3rd programme indicator is on, 2 doses
of rinse aid will be dispensed.
If the 4th programme indicator is on, 3
doses of rinse aid will be dispensed.
If the 1st, 2nd, 3rd and 4th programme
indicators are on, 4 doses of rinse aid will be
dispensed.
4. Press the On/Off key to exit the settings
menu. Your setting will be saved
automatically.

End of programme

C
When the programme you have
selected comes to an end, an
audible warning signal will warn
you to turn off your machine.
This audible signal will warn you
with certain intervals before it
turns off.
Start / Pause indicator will go off once the
washing programme has ended.
1.
Open the door of the machine.
2. Press the On/Off key to switch off your
machine.
3. Close the tap.
4. Unplug the machine from the socket.
33 / 43 EN

Advertisement

Table of Contents
loading

Table of Contents