Connecting to a WLAN and configuring network settings
Learn to connect via an access point (AP) when you are in a range of a WLAN. You can also configure network settings.
Connecting to a WLAN
1
Rotate the mode dial to
2
Select
,
,
,
3
Press [
], and then select Wi-Fi Setting.
•
In some modes, press [
instructions until the Wi-Fi Setting screen appears.
•
The camera automatically searches for available AP devices.
4
Select an AP.
Refresh
Samsung 1
Samsung 2
Samsung 3
Samsung 4
Samsung 5
Samsung 6
Back
Manual
Select WPS button connection to connect to a WPS AP.
•
Select Refresh to refresh connectable APs.
•
Select Add wireless network to add an AP manually.
•
.
, or
.
] or follow the on-screen
Icon
If you selected a secured AP, a pop-up window appears.
•
Enter the required passwords to connect to the WLAN. For
information about entering text, refer to "Entering text". (p. 131)
•
If a login page appears, refer to "Using the login browser".
(p. 129)
•
If you selected an unsecured AP, the camera will connect to
the WLAN.
If you selected a WPS profile supported AP, select WPS PIN
•
connection, and then enter a PIN on the AP device. You can
also connect to a WPS profile supported AP by selecting WPS
button connection on the camera, and then pressing the
WPS button on the AP device.
128
Wireless network
Description
Ad hoc AP
Secured AP
WPS AP
Signal strength
Press [ ] to open AP setting options