Canon EOS 200D Instruction Manual page 286

3 Geotagging Images
[52: GPS device settings] cannot be selected if the camera is
connected to a computer with an interface cable.
The smartphone can acquire location information only when the camera
is connected to a smartphone via Bluetooth.
Direction information is not acquired.
The acquired location information may not be accurate depending on the
travel conditions and the smartphone's status.
After the location information is acquired, doing any of the following will
erase the acquired location information.
• Setting [Bluetooth function] to a setting other than [Smartphone].
• Turning off the camera.
• Terminating Camera Connect.
• Turning off the smartphone's location information function.
After the location information is acquired, any of the following conditions
will erase the acquired location information.
• The camera power turns off.
• Bluetooth connection is terminated.
• The smartphone's remaining battery power is low.
If you operate the smartphone and establish a Wi-Fi connection when
the camera is in the auto power off state, location information may not be
acquired. Note that if the location data is acquired, the GPS connection
indicator will light up on the Quick Control screen.
Coordinated Universal Time, abbreviated as UTC, is essentially the
same as Greenwich Mean Time.
When shooting a movie, the GPS information at the starting time of the
movie shooting is appended.
286