S Selecting The Af Point - Canon EOS 200D Instruction Manual

S Selecting the AF Point

When <8: x> or <v: Xc> mode is set, since the camera
automatically focuses on the closest subject in normal cases, it may not
always focus on your desired subject.
In any other mode, you can select one AF point to focus solely on the
subject that AF point is aimed over.
You can also tap on the LCD monitor screen to select the AF point.
During manual AF point selection, tapping on the [
bottom left of the screen will switch the mode to automatic AF point
selection.
If you set [53: Switch S/A button] to [Enable], you can switch the
functions of the <S> button and <A> button.
Press the <S> button
1
The selected AF point will be
displayed on the LCD monitor and in
the viewfinder.
Select the AF point.
2
Use the <
AF point.
To select the AF point while looking in
the viewfinder, turn the <6> dial to
switch the point lit in red.
When all the AF points light up,
automatic AF point selection will be
set. The AF point will be selected
automatically to focus on the subject.
Pressing <0> toggles the AF point
selection between the center AF point
and automatic AF point selection.
Focus on the subject.
3
Aim the selected AF point over the
subject and press the shutter button
halfway to focus.
(9)
> cross keys to select the
V
] icon at the
.
119