Table of Contents
Advertisement
Quick Links
Trademarks
FOXWELL is trademark of Shenzhen Foxwell Technology Co., Ltd.
All other marks are trademarks or registered trademarks of their respective holders.
Copyright Information
©2020 Shenzhen Foxwell Technology Co., Ltd.
All rights reserved.
Disclaimer
The information, specifications and illustrations in this manual are based on the latest information
available at the time of printing.
Foxwell reserves the right to make changes at any time without notice.
Visit our website at:
www.foxwelltech.us
For Technical Assistance, send us email at
support@foxwelltech.com
1
Foxwell F1000B OBDII&Battery Tester User's Guide_ English Version_V1.00
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Foxwell F1000B
Summary of Contents for Foxwell F1000B
- Page 1 Disclaimer The information, specifications and illustrations in this manual are based on the latest information available at the time of printing. Foxwell reserves the right to make changes at any time without notice. Visit our website at: www.foxwelltech.us For Technical Assistance, send us email at support@foxwelltech.com...
-
Page 2: One-Year Limited Warranty
The customer will be billed for any parts or labor charges not covered by this limited warranty. d) FOXWELL will repair the Product under the limited warranty within 30 days after receipt of the product. If FOXWELL cannot perform repairs covered under this limited warranty within 30 days,... - Page 3 OF THE PRODUCT OR ARISING FROM BREACH OF THE WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, STRICT TORT, OR ANY OTHER LEGAL OR EQUITABLE THEORY, EVEN IF FOXWELL KNEW OF THE LIKELIHOOD OF SUCH DAMAGES. FOXWELL SHALL NOT BE LIABLE FOR DELAY IN RENDERING SERVICE UNDER THE LIMITED WARRANTY, OR LOSS OF USE DURING THE PERIOD THAT THE PRODUCT IS BEING REPAIRED.
-
Page 4: Safety Information
Block drive wheels before testing with engine running. Put the transmission in park (for ● automatic transmission) or neutral (for manual transmission). And never leave a running engine unattended. Do not wear jewelry or loose fitting clothing when working on engine. ● Foxwell F1000B OBDII&Battery Tester User’s Guide_ English Version_V1.00... -
Page 5: Table Of Contents
4.8 C OMPONENT ......................29 4.9 R EQUEST EHICLE NFORMATION 4.10 M ..........................30 ODULES RESENT 5 BATTERY TESTING OPERATIONS......................31 ....................31 5.1 C OBDII&B ONNECTING THE ATTERY TESTER ............................32 5.2 B ATTERY TESTING Foxwell F1000B OBDII&Battery Tester User’s Guide_ English Version_V1.00... - Page 6 9.3 U ............................47 NIT OF EASURE 9.4 K ............................48 9.5 D ............................49 9.6 T ............................49 TEST 9.6.1 Display Test............................50 9.6.2 Keypad Test............................50 9.6.3 LED Test............................51 9.7 T ............................52 NFORMATION Foxwell F1000B OBDII&Battery Tester User’s Guide_ English Version_V1.00...
-
Page 7: Using This Manual
IMPORTANT indicates a situation which, if not avoided, may result in damage to the test equipment or vehicle. Example: IMPORTANT Do not soak keypad as water might find its way into the OBDII&Battery tester. Foxwell F1000B OBDII&Battery Tester User’s Guide_ English Version_V1.00... -
Page 8: Introduction
2 Introduction F1000B is developed by the most distinguished mind of the industry. It is specially designed to support all 10 OBDII service modes, including live data, O2 sensor test and more, on OBDII/EOBD compliant cars, SUVs, light-duty truck and mini-vans sold worldwide since 1996. It is also develop to test 12V regular flooded AGM flat plate, AGM spiral and gel batteries. -
Page 9: Accessory Descriptions
The OBDII&Battery tester normally powers on whenever it is connected to the data link connector (DLC). To connect to vehicle power: 1. Locate the data link connector (DLC). The DLC is generally located under the dash on the driver side of the vehicle. Foxwell F1000B OBDII&Battery Tester User’s Guide_ English Version_V1.00... -
Page 10: Connecting To Personal Computer With Usb Cable
Service $05 - request oxygen sensor monitoring test results ● Service $06 - request on-board monitoring test results for specific monitored systems ● Service $07 - request emission-related diagnostic trouble codes detected during current or ● last completed driving cycle Foxwell F1000B OBDII&Battery Tester User’s Guide_ English Version_V1.00... - Page 11 (ID) assigned by manufacturer (i.e. Engine or Module $A4). A screen with prompted information to erase the previously stored data in order to save the data from this test displays as below. Foxwell F1000B OBDII&Battery Tester User’s Guide_ English Version_V1.00...
-
Page 12: Read Codes
ECU. There are two ways to read codes using F1000B. ● Press the Read hot key to read codes from home screen. ● Traditional way: select Read Codes from the diagnostic menu. -
Page 13: Erase Codes
Figure 4-5 Sample DTC Description Screen NOTE If no DTCs are present, the message “No (Pending) Codes Found!” is displayed. If any manufacturer specific or enhanced codes detected, F1000B reads the correct DTC information automatically according to the VIN. 4.2 Erase Codes Erase Codes menu lets you to clear all current and stored DTCs from the control module. -
Page 14: Live Data
Unit of measure (Please refer to Chapter 7System Setup) ● 4.3.1.1 Complete Data Set Complete Data Set displays all supported PIDs of the vehicle being tested. To view all live PID data: Foxwell F1000B OBDII&Battery Tester User’s Guide_ English Version_V1.00... - Page 15 4. Scroll with the up and down arrow keys to scroll through data to select lines, and left and right arrow keys to scroll back and forth through different screens of data. Foxwell F1000B OBDII&Battery Tester User’s Guide_ English Version_V1.00...
- Page 16 To create a custom data list: 1. Select Custom List from the menu and press the ENTER key. Figure 4-13 Sample Live Data Menu Screen 2. The custom data stream selection screen displays. Foxwell F1000B OBDII&Battery Tester User’s Guide_ English Version_V1.00...
-
Page 17: Record Data
Menu options typically include: Complete Data ● Custom Data ● Unit of measure (Please refer to Chapter 7 Set Up) ● NOTE There are two types of trigger methods used. Foxwell F1000B OBDII&Battery Tester User’s Guide_ English Version_V1.00... - Page 18 3. Scroll with the up and down arrow keys to pick a trigger mode and press the ENTER key to confirm. Figure 4-19 Sample Pick Trigger Mode Screen 4. Use the UP/DOWN key to select a memory location and press ENTER to confirm. Foxwell F1000B OBDII&Battery Tester User’s Guide_ English Version_V1.00...
- Page 19 Select Memory screen and choose another one. 6. If Manual Trigger is selected, following screen displays: Figure 4-22 Sample Manual Trigger Recording Screen 7. If DTC Trigger is picked, following screen displays: Foxwell F1000B OBDII&Battery Tester User’s Guide_ English Version_V1.00...
-
Page 20: Playback Data
4.3.3 Playback Data The Playback Data is used to playback recorded PID data. To playback data: 1. Scroll with the up and down arrow key to select Play back Data from the Menu. Foxwell F1000B OBDII&Battery Tester User’s Guide_ English Version_V1.00... -
Page 21: Freeze Frame
DTC set. It is a good function to help determine what caused the fault. To view freeze frame data: 1. Select View Freeze Frame from the Diagnostic Menu. Details of freeze frame data displays. Foxwell F1000B OBDII&Battery Tester User’s Guide_ English Version_V1.00... -
Page 22: Read I/M Readiness Status Data
Below is a list of abbreviations and names of OBD II monitors supported by the OBDII&Battery tester. Abbreviation Name Misfire Monitor Misfire Monitor Fuel System Mon Fuel System Monitor Comp. Component Comprehensive Components Monitor Catalyst Mon Catalyst Monitor Foxwell F1000B OBDII&Battery Tester User’s Guide_ English Version_V1.00... - Page 23 The built-in beeper works with the colored LED simultaneous, as an assistance to reflect the I/M Readiness test results: Green - two long beeps. ● Yellow - short, long, short beeps. ● Red - four short beeps. ● Foxwell F1000B OBDII&Battery Tester User’s Guide_ English Version_V1.00...
- Page 24 3. Depending on readiness test, one of these 2 screens will be present. Use the up and down arrow keys to scroll through data. Press the BACK key to exit. Figure 4-32 Sample IM Readiness Screen 1 Foxwell F1000B OBDII&Battery Tester User’s Guide_ English Version_V1.00...
-
Page 25: O2 Monitor Test
Figure 4-34 Sample Diagnostic Menu Screen 2. Use the UP/DOWN key to highlight an O2 sensor and press the ENTER key to confirm. A screen with details of the selected sensor displays. Foxwell F1000B OBDII&Battery Tester User’s Guide_ English Version_V1.00... -
Page 26: On-Board Monitor Test
Non-CAN vehicles. And for CAN vehicles, it receives test data for emission-related power train components and systems that are and are not continuously monitored. It is vehicle manufacturer who is responsible for assigning test and component IDs. NOTE Foxwell F1000B OBDII&Battery Tester User’s Guide_ English Version_V1.00... - Page 27 Use the up and down arrow keys to scroll through data to select lines, and left and right arrow keys to scroll back and forth through different screens of data. For non-CAN vehicles, test screen is illustrated as below: Foxwell F1000B OBDII&Battery Tester User’s Guide_ English Version_V1.00...
-
Page 28: Component Test
Figure 4-41 Sample Non-CAN vehicle test screen For CAN vehicles, test screen is illustrated as below: Figure 4-42 Sample Can vehicle test screen 4. Press the BACK key to exit and return. 4.8 Component Test Foxwell F1000B OBDII&Battery Tester User’s Guide_ English Version_V1.00... -
Page 29: Request Vehicle Information
It may take several minutes to do the CVN calculation. In-use performance tracking tracks performance of key readiness monitors. NOTE Available options will vary depending on the vehicle under test. To request vehicle information: Foxwell F1000B OBDII&Battery Tester User’s Guide_ English Version_V1.00... -
Page 30: Modules Present
4. Press the BACK key to exit and return. 4.10 Modules Present The OBDII&Battery tester identifies module IDs and communication protocols for OBD2 modules in the vehicle. To view module IDs and communication types: Foxwell F1000B OBDII&Battery Tester User’s Guide_ English Version_V1.00... -
Page 31: Battery Testing Operations
2. Connect the red clamp to the positive (+) terminal and the black clamp to the negative (-) terminal. 3. Rock the clamps back and forth to make sure the clamps are firmly connected. Foxwell F1000B OBDII&Battery Tester User’s Guide_ English Version_V1.00... -
Page 32: Battery Testing
If you are testing inside a vehicle, make sure all accessory loads are cut off, the key is not in the ON position and the doors are closed. 5.2 Battery Testing F1000B 12 Volt Automotive Battery Analyzer allows you to analyze the battery healthy status and view battery charging status. To start a battery test: 1. - Page 33 ENTER to confirm. Not all rating systems are available for each application. Figure 6-5 Sample Battery Standard Screen 5. You may find the battery type and battery rating label on every battery. Global Rating Systems: Standard Description F1000B Testing Range Foxwell F1000B OBDII&Battery Tester User’s Guide_ English Version_V1.00...
- Page 34 If the battery belongs to CCA standard, just select the corresponding CCA standard value and press ENTER to start the testing. 6. View test results on the screen. Depending on battery status, one of the following test results may display. Foxwell F1000B OBDII&Battery Tester User’s Guide_ English Version_V1.00...
-
Page 35: Dtc Lookup
The OBDII&Battery tester keeps the results of last test only. When you start a new test, the last results are overwritten. 6. DTC Lookup DTC Lookup menus allows to request DTC definitions stored in the OBDII&Battery tester. To Look up DTCs: Foxwell F1000B OBDII&Battery Tester User’s Guide_ English Version_V1.00... - Page 36 If a P1xxx, C1xxx, B1xxx or U1xxx code is entered, select a vehicle make to look for DTC definitions. Press the BACK key to exit. Figure 5-3 Sample Trouble Codes Screen Foxwell F1000B OBDII&Battery Tester User’s Guide_ English Version_V1.00...
-
Page 37: Review Data
View and analysis the recorded information, then press BACK to exit. 8 Printing and Update NT Wonder is an extremely easy-to-use that is used to update F1000B OBDII&Battery tester. Also, it allows you to upload recorded test results to your PC or laptop for analysis and printing. Still, it enables you to search DTC, read the manuals as well set up the language and style of the application. -
Page 38: Update The Obdii& Battery Tester
8.1 Updating the OBDII&Battery Tester F1000B is able to be updated to keep you stay current with the latest development of diagnosis. To update the OBDII&Battery tester, you need following tools: ●F1000B OBDII&Battery tester ● Update Tool NTWonder ● PC or laptop with USB Ports and Internet explorer ●... -
Page 39: Printing Data
Figure 9-4 Sample Printing Activation Function 3. Connect F1000B to computer with the USB cable supplied to power it on. 4. Use the LEFT/RIGHT key to select Print Data from home screen of the F1000B and press the ENTER key to confirm. -
Page 40: Searching Dtc
2. Start the printing application by clicking the Search DTC Button from the menu. 3. Input the valid code number and the definition of the code will be highlighted on the screen. Foxwell F1000B OBDII&Battery Tester User’s Guide_ English Version_V1.00... -
Page 41: User Manual
2. Select the language and the style you want from the left to right column. 3. Select and tick the “Auto check for updates” on the bottom of the screen, then press Apply key to confirm. Foxwell F1000B OBDII&Battery Tester User’s Guide_ English Version_V1.00... -
Page 42: System Setup
To configure system language: 1. Use the LEFT/RIGHT key to highlight Setup from home screen and press the ENTER key. Figure 8-1 Sample Home Screen 2. A screen of a list of menu options displays. Foxwell F1000B OBDII&Battery Tester User’s Guide_ English Version_V1.00... -
Page 43: Configure Monitors
Comprehensive Component ● Non-Continuous Monitors: NOTE Non-continuous monitors are different for spark ignition cars (gasoline engines) and compression ignition card (diesel engines). Spark ignition vehicles (Gas) Catalyst (CAT) ● Heated Catalyst ● Foxwell F1000B OBDII&Battery Tester User’s Guide_ English Version_V1.00... -
Page 44: Spark Ign Required Monitors
To configure spark IGN required monitors: 1. Use the UP/DOWN key to highlight Spark IGN Required Monitors from menu and press the ENTER key to confirm. 2. The custom monitors selection screen displays. Foxwell F1000B OBDII&Battery Tester User’s Guide_ English Version_V1.00... -
Page 45: Compression Ign Required Monitors
To configure spark compression required monitors: 1. Use the UP/DOWN key to highlight Compression IGN Required Monitors from the menu and press the ENTER key to confirm. Figure 8-8 Sample Configure Monitors Display Foxwell F1000B OBDII&Battery Tester User’s Guide_ English Version_V1.00... -
Page 46: Allowed Inc Monitors
Emissions tests vary depending on the geographic or regional area in which the vehicle is registered. F1000B provides a more flexible way to meet different standards, which allows the user to select 0, 1, 2, 3 INC monitors in test. -
Page 47: Reset Factory Default
Unit of measure opens a dialog box that allows you to choose between US customary or metric units of measure. To change the unit setup: 1. Scroll the UP/DOWN keys to highlight Unit of Measure from Setup menu and press the ENTER key. Foxwell F1000B OBDII&Battery Tester User’s Guide_ English Version_V1.00... -
Page 48: Key Beep Set
1. Use the UP/DOWN key to highlight Key beep set from Setup menu and press the ENTER key. Figure 8-15 Sample Setup Screen 2. Press the UP/DOWN arrow key select an item and press the ENTER key to save and return. Foxwell F1000B OBDII&Battery Tester User’s Guide_ English Version_V1.00... -
Page 49: Diag Beep Set
Key beep set opens a dialog box that allows you to check if the LCD display and the operation of keypad and LED are working correctly. Typical menu includes: Display Test ● Foxwell F1000B OBDII&Battery Tester User’s Guide_ English Version_V1.00... -
Page 50: Display Test
Selecting Key Test option opens a screen that allows you to check the functionality of the keypad. To test the keypad: 1. Use the UP/DOWN key to highlight Keyboard Test from Setup menu and press the ENTER key. Foxwell F1000B OBDII&Battery Tester User’s Guide_ English Version_V1.00... -
Page 51: Led Test
1. Use the UP/DOWN key to highlight LCD Test from Setup menu and press the ENTER key to start test. Figure 8-23 Sample Tool Self-test Screen 2. The Green Yellow Red indicators will flashing randomly, the indicators shall turn off when exit by pressing any key. Foxwell F1000B OBDII&Battery Tester User’s Guide_ English Version_V1.00... -
Page 52: Tool Information
2. A screen with detailed information of the OBDII&Battery tester displays. Figure 8-26 Sample Tool Information Screen 3. Press the BACK key to exit and return to the Setup menu. < END > Foxwell F1000B OBDII&Battery Tester User’s Guide_ English Version_V1.00...
Need help?
Do you have a question about the F1000B and is the answer not in the manual?
Questions and answers