Advertisement
• Points of cautions applicable when wiring the R7M Series
To external apparatus
Keep the cable as
short as possible.
Motor
Drive Cable
Shielded
Earth
Clamp
Remove a part of the shielded
cable cover and ground it
to the internal panel
plate using an earth
clamp.
To external apparatus
Maintain distance between
cables and noise sources.
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: + 81 ( 6 ) 6659-8201 Fax: + 81 ( 6 ) 6659-8510 E-mail: info@m-system.co.jp
Cable
To connect with
apparatuses outside
the control panel via
Modbus, ground the
cable shield using
an earth clamp.
Grounding in pig tail form
is not effective.
R7M-DA16
Keep the wires away from
each other at both ends of
the filter.
Noise
Filter
EM-7803-F Rev.5
P. 7 / 7
Advertisement
