Samsung SyncMaster 957p Manual page 37

On-Screen Display
Menu How to adjust
Sync. Input Type(Option)
Use this menu to set your monitor to the correct type of synchronization. Select
'Separate' if the computer is sending a separate synchronization signal. Select
'Sync. on Green' if the computer expects the monitor to synchronize with the
green signal it sends. Refer to your computer or video card user's manual to
determine the correct setting.
1 Push the Menu (
2 Push the button or
◀
Push the button or
▲
3 Push the Menu (
selection screen.
4 Use the button or
▲
D-SUB/BNC(Option)
Use this menu to choose between the signal source connected to the BNC
connector input and the signal source connected to the D-SUB connector input.
Note: When you are finished, wait for a few seconds and the screen will blank
then display the image from the new signal source(other computer).
A cable must be connected to both inputs to use this function.
1 Push the Menu (
2 Push the button or
◀
Push the button or
▲
3 Push the Menu (
4 Use the button or
◀
User's Manual
) button.
button until the Advanced screen is displayed.
▶
button to select Sync. Input Type.
▼
) button to open the Sync. Input Type
button to select Separate or Sync. on Green.
▼
) button.
button until the Advanced screen is displayed.
▶
button to select D-SUB/BNC.
▼
) button to open the D-SUB/BNC selection screen.
button to select D-SUB or BNC.
▶
35