Samsung SyncMaster 957p Manual page 13

Introduction
Rear
(The configuration at the back of the monitor may vary from product to product.)
1. Power port
2. Signal Cable
3. BNC Connectors (Option) Connect the signal cable to the BNC signal port on the back of your monitor.
4. USB Connector
Note: See Connecting Your Monitor for further information regarding cable connections.
Connect the power cord for your monitor to the power port on the back of the monitor.
Connect the signal cable to the video port on your computer, video board, video card, or
graphics card.
Connect the USB cable to the USB port on the back of your monitor.
User's Manual 13