Advertisement
TH-L32C10R2
4 Power LED Blinking Timing
1. Subject
Information of LED Flashing timing.
2. Contents
When an abnormality occurs, the protection circuit will operate and reset the unit to stand by mode. During this time, the
defective block can be identified by the number of blinking times of the Power LED on the front panel of the unit as follow:
Blinking times
1
Inverter_SOS
3
SOS_3.3V over voltage protection
4
DTV_ 9V decreased / short circuit, main convertor stop detection.
5
Main_ 9V decreased
6
Sub_ 5V decreased
7
Sub_ 3.3V decreased
8
MAIN_ 3.3V decreased
9
Sound_ SOS
13
Emergency SOS
14
Audio PWM SOS
Contents
8
Advertisement
