Advertisement
Installation Procedure
Lefroy Brooks always recommends that plumbing products be installed by a licensed professional.
Shut off main water supply before installation.
B
5
Take out the stopper.
6
Turn on the flow controller. Turn the thermostatic cartridge until the water temperature is at 38.
Suggestion: attach a hose to the outlets and guide the water to the basin or another container to
test the temperature and prevent it from spilling on the floor.
7
Turn off the water supply. Install the stopper and make sure its "B" plane as shown is horizontal
and on the left side.
8
Fix the stem extension and the adjusting ring.
5
7
Steps 5-8
6
8
5
Advertisement
