Saber light ATD-80057 Owner's Manual

Features And Specifications:
•
13W super bright fluorescent bulbs provide 120 Lux brightness
•
25 ft 16/3 SJTOW cord remains flexible in cold weather and is oil & grease resistant
•
Heavy Duty end caps with shatter‐proof housing
•
Drop resistant with high impact Lexan lens
•
Tool tap outlet with power indicator & overload protection
•
Uniquely designed end allows for use as a flashlight
•
Metal hooks for hanging and a 360° flexible ratcheting hook
Operating instructions
Simply plug into any 120 VAC outlet and turn on by pressing top of switch firmly and hold for 1 to 2 seconds, then release, this will
start the lamp. To turn off, depress switch at the bottom.
To Change Bulb:
•
Unplug unit from power supply
•
Remove end bumper(A) and end cap(B)
•
Remove bulb protector(C)
•
Grasp end of bulb and pull straight out
•
Slide new bulb in and push down into socket firmly.
•
Re‐assemble the bulb protector, the end cap and the end bumper.
Cautions
•
Do NOT overload circuit – Do not plug in more than 1500 watts or 12 amps into the base of this light. Check the amperage rating of the tool or
appliance that you are using before connecting anything to the outlet(s) on this product to be sure that you are not overloading the circuit.
•
Do NOT service this reel light while it is plugged in. It may cause electrical shock
•
Do NOT submerge in water. – It may cause electrical shock and/or fires. To clean, wipe with damp cloth only, do not use solvents, and clean only
when the unit is unplugged from power source.
•
Do NOT use this lamp in explosive atmosphere ‐ Near flammable liquids or where explosion proof lamps are required.
•
The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It
must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by
the operator.
13 Watt Short Light w/25' Cord
Made in China to ATD Tools, Inc. Specifications
ATD‐80057
Owner's Manual