Advertisement
Boil-dry protect
Should you accidentally let the kettle operate without water, the
boil-dry protection will automatically switch off the power. If this
occurs, allow the kettle to cool before filling with cold water before
re-boiling.
Cleaning and maintenance
Always disconnect the appliance from the power outlet before
cleaning.
1.Never immerse the kettle, power cord or power base in water, or
allow moisture to contact with these parts.
2.Wipe the appearance of body with a wild and damp cloth or
cleaner, never use a poisonous cleaner.
CAUTION: Do not use chemical, steel, wooden or abrasive
cleaners to clean the outside of the kettle to prevent the gloss loss.
Removal of mineral deposits
Your kettle should be periodically descaled as the mineral deposits
in tap water may form scale on the bottom of kettle so as to cause
the operation less efficiency. You can use the commercially
available descaler and follow the instructions on the package of
descaler. Alternatively, you may follow below instructions using the
white vinegar.
1. Fill the kettle with 3 cups of white vinegar, then adding water to
the amount so as to cover the bottom of kettle completely. Leave
the solution in the kettle overnight.
2. Then discard the mixture in the kettle, then filling the kettle
with clean water, boiling and then discard the water. Repeat
several times until the odor of vinegar has been flushes away. Any
stains remaining inside the spout can be removed by rubbing with
a damp cloth.
5
Advertisement
