IMPORTANT SAFEGUARDS 1. Read all instructions before using. 2. Before connecting the kettle to the power supply, check that the voltage indicated on the appliance (underside the kettle & base) corresponds with the voltage in your home. If this is not the case, contact your dealer and stop using the kettle. 3.
23. If the kettle is overfilled, boiling water may spill out. 24. The appliance must not be immersed. 25. Always ensure the lid is closed and do not lift it while the water is boiling. Scalding may occur if the lid is removed during the brewing cycles. 26.
spout when boiling. Ensure that the lid is firmly in place before plugging the power outlet. 3. Position the kettle on the power base. 4. Connect the plug into a power outlet. Press down the On/Off switch, the indicator will light up.
5. When not use or storage, the power cord may be wound under the bottom of kettle. REMOVAL OF MINERAL DEPOSITS Your kettle should be periodically descaled as the mineral deposits in tap water may form scale at the bottom of kettle interior so as to cause the operation less efficiency. You can use the commercially available descaler and follow the instructions on the package of descaler.
Correct Disposal of this product This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased.