Page 1
KETTLE INSTRUCTION MANUAL MODEL: RM/349 Read this manual thoroughly before using and save it for future reference...
Page 3
IMPORTANT SAFEGUARDS 1. Read all instructions before using. 2. Before connecting the kettle to the power supply, check that the voltage indicated on the appliance (underside the kettle & base) corresponds with the voltage in your home. If this is not the case, contact your dealer and stop using the kettle.
Page 4
the kettle to cool before putting on or taking off parts, and before cleaning the appliance. 19. To disconnect, turn any control to “off,” then remove plug from wall outlet. 20. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
Page 5
KNOW YOUR WATER KETTLE BEFORE USING YOUR KETTLE If you are using the kettle for the first time, it is recommended that you should clean your kettle before use by boiling the Max capacity of water once and then discarding the water. Wipe the surface with damp cloth. NOTE: The max capacity of kettle is 1.7L.
Page 6
indicator will light up. Then the kettle will start to boil the water, once the water has being boiled the On/Off switch will be off automatically. You can shut off the power by lifting the On/Off switch at any moment during boiling water. If you want to boil water again, only press down the On/Off switch directly to restart the kettle.
Page 7
5. When not use or storage, the power cord may be wound under the bottom of kettle. REMOVAL OF MINERAL DEPOSITS Your kettle should be periodically descaled as the mineral deposits in tap water may form scale at the bottom of kettle interior so as to cause the operation less efficiency.
Need help?
Do you have a question about the RM/349 and is the answer not in the manual?
Questions and answers