Getting Started - Champion CHLED040 User Manual

Getting started

Turning On and Off
Connect the AC cord to power the TV. At this time the TV will enter standby mode and power
indicator will turn red. Use Power
turn on the TV. After switching off the TV for 5 seconds, you can turn on TV again.
Select input source
Press SOURCE button on remote control to display source select list.
Use arrows to highlight the source you need and press OK to confi rm.
First time settings
Connect an RF cable from the TVs input called "ANT" and to your TV aerial socket.
1. Language
Select the language to be used for menus
and message.
2. Country
Press button to select the country.
Press OK button to tuning setup menu, use t
he arrows button to select tune type.
3. Tuning Setup
First tuning digital, press MENU button to skip
analogue tuning. Second tuning digital, press
MENU button to skip to TV tuning.
button on the side panel of TV or on the remote control to
EN