Sound Menu - Champion CHLED040 User Manual

Picture mode
Select the preset picture mode. You can also switch the mode via PMODE button on remote con-
trol. You can only custom the contrast, color, brightness and tint in User mode.
• Contrast: Adjust the contrast of the TV display.
• Brightness: Adjust the brightness of the TV display.
• Color: Adjust the color saturation of the TV display.
• Tint: Adjust the tint of the TV display. Only available in NTSC channel.
• Sharpness: Adjust the sharpness of Picture. This function is not available in PC mode.
• Color Temperature: Adjust the color temperature of the TV display. Set the TV picture dis
play from colder to warmer.
• Noise Reduction: Adjust the noise reduction level of the TV display.
• HDMI mode: Select the HDMI mode to audio, video and PC.

Sound Menu

Sound menu is used for TV sound effect adjusting. Press MENU on the remote. Select SOUND
from the main menu. Press the OK button to proceed to SOUND menu.
Sound Mode
Select the preset Sound mode. You can also switch the mode via SMODE button on the remote
control. You can only custom the treble and bass in User mode.
• Treble: Adjust the treble level of TV sound.
• Bass: Adjust the bass level of TV sound.
• Balance: Adjust the balance between left and right channels.
• Auto volume level: Select auto volume control on/off, it is a function that limits the TV
volume for hearing protection.
• SPDIF: Select three modes area available including Auto, PCM and OFF.
• AD Switch: Enter the AD Switch sub-menu, then select this option to adjust AD volume.
EN