Using Map View mode
Checking shooting location on the map
The location where a picture with location information was taken
and its name can be checked on the map.
Select GPS ON on the top of the camera.
1
Set the mode dial to
2
Press [
].
o
•
The current location is displayed on the map.
3
Press [
].
f
•
Pictures with location information are displayed in the order
they were taken in.
•
Press [
f
] to cancel the thumbnail view. Press [
again to return to thumbnail view.
London
Single View
Change Location
.
f
] once
Shooting location
display
4
Select a desired picture by pressing [
•
The location the picture was taken in is displayed.
•
A desired location can be viewed by pressing
[D/M/F/t] to move.
Viewing the map by enlarging
Turn the dial to the right [Zoom T/Enlarge]
(Turn the dial to the left [Zoom W/Reduce])
London
Single View
•
GPS data must be stored in an external memory to normally operate
the Map View mode.
•
A maximum of 3 thumbnail images can be displayed on the screen.
•
If there is no location information on a picture, the location name is not
displayed on the map in Map View mode.
•
GPS data for each country containing reception areas can be
downloaded from the websites at www.samsung.com.
Refer to the websites for further information.
39
Extended functions
F/t].
Enlargement adjustment bar
Change Location