General Safety Instructions; Caution. Hot Surface - Siemens TB402810 Operating Instructions Manual

EN • Operating instructions
Thank you for buying the iQ300 steam iron
from Siemens.
Carefully read through the operating instructions
for the appliance and safeguard them for future
reference.
You can download this manual from the local
homepages of Siemens.

General safety instructions

The iron must not be left unattended while it is connected to the supply
❐
mains.
Remove the plug from the socket before filling the appliance with water
❐
or before pouring out the remaining water after use.
The appliance must be used and placed on a stable surface.
❐
When placed on its stand, make sure that the surface on which the
❐
stand is placed is stable.
The iron should not be used if it has been dropped, if there are visible
❐
signs of damage or if it is leaking water. It must be checked by an
authorized Technical Service Centre before it can be used again.
With the aim of avoiding dangerous situations, any work or repair that
❐
the appliance may need, e.g. replacing a faulty mains cable, must only
be carried out by qualified personnel from an Authorised Technical
Service Centre.
This appliance can be used by children aged from 8 years and above
❐
and persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they have been given supervision
or instruction concerning use of the appliance in a safe way and
understand the hazards involved. Children shall not play with the
appliance. Cleaning and user maintenance shall not be made by
children without supervision.
Keep the iron and its cord out of reach of children less than 8 years of
❐
age when it is energized or cooling down.
This appliance is designed only for household use up to 2000m above
❐
sea level.

CAUTION. Hot surface.

❐
Surface is liable to get hot during use.
12
S I E ME NS
Open the leaflet sides