Installing An Anti-Theft Lock; Read Before Setting Up A Wireless Internet Connection - Samsung UE78KS9000 E-Manual

Installing an anti-theft lock

An anti-theft lock is a physical device that can be used to protect the TV against theft. Look for the
●
lock slot on the back of the TV. The slot has a
around an object that is too heavy to carry and then thread it through the TV's lock slot. The lock is
sold separately.
The method of using an anti-theft lock may differ for each TV model. Refer to the lock's user manual
●
for more information.
" This function is only available on certain models in specific geographical areas.

Read before setting up a wireless Internet connection

Precautions for wireless Internet
This TV supports the IEEE 802.11a/b/g/n/ac communication protocols. Samsung recommends using
●
IEEE 802.11n. Video files stored on a device connected to the TV via Home Network may not play
back smoothly.
" IEEE 802.11 ac communication protocol is not available on certain models.
To use wireless Internet, the TV must be connected to a wireless router or modem. If the wireless
●
router supports DHCP, the TV can use a DHCP or static IP address to connect to the wireless network.
Select a channel that is not currently in use for the wireless router. If the channel set for the
●
wireless router is currently being used by another device, the result is usually interference and/or a
communications failure.
Most wireless networks have an optional security system. To enable a wireless network's security
●
system, you need to create a password using characters and numbers. This password is then needed
to connect to a security-enabled AP.
Wireless security protocols
The TV only supports the following wireless network security protocols.
●
Authentication Modes: WEP, WPAPSK, WPA2PSK
–
Encryption Types: WEP, TKIP, AES
–
In compliance with the newest Wi-Fi certification specifications, Samsung TVs do not support WEP
●
or TKIP security encryption in networks running in the 802.11n mode.
If the wireless router supports WPS (Wi-Fi Protected Setup), you can connect the TV to your network
●
using PBC (Push Button Configuration) or a PIN (Personal Identification Number). WPS automatically
configures the SSID and WPA key settings.
The TV cannot connect to non-certified wireless routers.
●
icon next to it. To use the lock, wrap the lock cable