Frost-Free Storage; Ordering Accessories; Warranty And Support - Philips HD6570/60 Manual

English
26
Flushing cycles

Frost-free storage

Ordering accessories

Warranty and support

7 The machine is ready for descaling when the on/off button and CALC
button light up continuously. Press the CALC button until the machine
beeps twice to start the descaling cycle.
8 When the descaling cycle is in progress, the descaling solution comes out
of the machine at intervals. During the last 5 minutes, the descaling
solution flows continuously.
Warning: Do not interrupt the descaling cycle.
9 When all the descaling solution in the water reservoir has been used up
after approximately 45 minutes, the on/off button flashes quickly and the
CALC button flashes slowly.
10 Empty the bowl and place it back under the spout.
11 Remove the used coffee pod or the thin descaling filter from the pod
holder.
1 Rinse the water reservoir and fill it with fresh water until the MAX
indication. Place the water reservoir back into the machine.
2 Press the CALC button to start the flushing cycle.The water flows
continuously for approximately 5 minutes.
3 Wait until the machine has completed the flushing cycle. The on/off
button flashes quickly and the CALC button flashes slowly.
4 Empty the bowl and place it back under the spout.
5 Repeat steps 1 to 4 twice to complete the flushing procedure. When the
last flushing cycle is complete, the machine switches off automatically.
If the coffee machine has already been used and therefore has been flushed
with water, it may only be used and stored in a frost-free place to prevent it
from becoming damaged.
To buy accessories or spare parts, visit www.philips.com/parts-and-
accessories or go to your Philips dealer. You can also contact the Philips
Consumer Care Center in your country (see the international warranty leaflet
for contact details).
If you need information or support, please visit www.philips.com/support or
read the international warranty leaflet.