Philips HD6570/60 Manual page 10

English
10
1 l
5 Place a bowl with a capacity of at least 1 liter under the spout.
6 Make sure that a pod holder, without pod or pods, is in place.
7 Put the plug in an earthed wall socket.
8 Press the on/off button. The button lights up to indicate that you have to
flush the machine.
9 To start flushing, press any of the recipe buttons on the touch panel.
- During the flushing cycle, the system fills itself with water from the
water reservoir and cold water comes out of the coffee spout and milk
spout. During the flushing cycle, the machine produces more noise
than during a regular brewing cycle.
- When all the water in the water reservoir has been used up, the
flushing cycle is finished and the machine switches off. You may notice
some steam coming from the machine, this is normal.