Philips Selecon PLPROFILE1 MKI Installation & User Manual page 19

PLPROFILE1 MKII LED Luminaires
Menu Structure (continued)
Continued from previous page
Edit a Preset
Sub Menu
Select Preset to Edit - (Option)
Selects a current preset and outputs
the preset, so preset can be edited.
Note: To save a specific look of the
fixture, see Save Presets.
For additional information, refer to
"Presets" on page
Note: When DMX512 signal is present, Edit a Preset option will not appear in menu structure.
Color Mixer
Sub Menu
Select Color or Intensity to Adjust -
(Option)
Note: When DMX512 signal is present, Color Mix option will not appear in menu structure.
Settings
Sub Menu
SETTINGS - (Option)
Scrolls and sets the various fixture
settings using arrow buttons.
Continued next page
Options
Off
Scratch Pad
Warm White*
Cool White*
Day Light*
19.
Preset X (5 through 31)**
Options
Red
Green
Blue
White
Intensity
Options
Comments
Users can:
• Edit the current settings (look) to a
specific recallable Preset in the fix-
ture's memory.
• Edit the values for Red, Green,
Blue, White, and Intensity values
(in percent%) by using the arrow
buttons.
• Once the values are adjusted, the
"Save Preset" menu option
appears to save the edits.
NOTES:
*Only intensities may be stored on
White Color Temperature presets.
RGBW in these presets cannot be
edited or changed.
**If a Calibrated Preset's Color Mix is
changed (5 thru 25), an asterisk '*' is
appended to the end of the name to
indicate that it has been modified.
This only happens if the name
matches the original calibrated name,
stored in EEPROM. This does not
happen if the Intensity is changed,
only the color mix.
Comments
Users can:
• Edit Red, Green, Blue, White, and
Intensity values (in percent%) by
using the arrow buttons.
• Once the values are adjusted,
press [OK] to save the edits to
scratch pad.
Comments
See "Settings" on page 19 for details.
Installation & User's Manual
17
Menu Structure