Samsung UN19D4000ND E-Manual page 174

Problem
The connected
device is not
displayed.
◀
The TV sound
is not output
through the
receiver.
●
Check whether or not the device supports Anynet+ functions.
●
Check whether or not the HDMI cable is properly connected.
●
Check whether
System menu.
●
Search Anynet+ devices again.
●
You can connect an Anynet+ device using an HDMI cable only.
Some HDMI cables may not support Anynet+ functions.
●
If Anynet+ is terminated because there has been a power failure
or the HDMI cable has been disconnected, please repeat the
device scan.
●
Connect the optical cable between TV and the receiver.
Possible❑Solution
Anynet+❑(HDMI-CEC)
English
is set to On in the
▶