Anynet - Samsung UN19D4000ND E-Manual

Problem
I want to start

Anynet+.

I want to exit
Anynet+.
◀
●
Check if the Anynet+ device is properly connected to the TV
and check if the❑Anynet+❑(HDMI-CEC)
System menu.
●
Press the TOOLS button to display the Anynet+ menu and
select a menu you want.
●
Select View❑TV
●
Press the SOURCE button on the TV remote control and select
a device other than an Anynet+ device.
●
Press >❑CH❑< to change the TV mode. (Note that the
channel button operates only when a tuner-embedded Anynet+
device is not connected.)
Possible❑Solution
in the Anynet+ menu.
English
is set to On in the
▶