Caring For Your Microtalk - Cobra microTALK PR560 Owner's Manual

Introduction

Caring for Your microTALK

Your microTALK
cared for properly. Handle the radio gently. Keep the radio away from
dust. Never put the radio in water or in a damp place. Avoid exposure
to extreme temperatures.
Remove Belt Clip
Pull Down Lock Latch
Insert Batteries
Operation
® radio will give you years of trouble-free service if
Batteries
To Install or Replace Batteries:
1. Remove belt clip by releasing belt clip latch
and sliding clip up.
2. Pull down on the Battery Door Latch to remove
the battery compartment cover.
3. Insert four AAA batteries. (Always use high
quality alkaline batteries.) Position batteries
according to polarity markings.
4. Replace Battery Compartment cover and belt clip.
See information on
battery pack and desktop charger
accessories ordering instructions.
The Basics to Get You Started
Your microTALK
To get started, simply:
1. Press the Power button to turn On your radio.
2. Press the Channel Up or Channel Down
button to select a channel.
Both radios must be tuned to the
same channel to communicate.
3. Press and hold the Talk button while
speaking into the microphone.
4. When finished talking, release the Talk
button and listen for a response.
Customer Assistance
® Radio
page
® radio is easy to use.
Nothing comes close to a Cobra
Warranty
17 for optional
® 1
•
•